• Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

  • December 20, 2023 6 min read

    Mastering the Cold Side of Brewing: A Comprehensive Guide

    Mastering the Cold Side of Brewing: A Comprehensive Guide


    Brewing beer is both an art and a science, with every stage of the process contributing to the final product's quality and flavor. While many homebrewers focus on the hot side of brewing, the cold side is equally important, especially when it comes to brewing hoppy beers like NEIPAs and IPAs. In this comprehensive guide, we will explore the entire cold side process, from chilling the wort to conditioning, carbonating, and packaging, with a focus on producing top-notch hop-infused beers.

    1. Chilling Wort

    The journey through the cold side process begins as soon as you conclude the hot-side brewing. Chilling your wort rapidly to the desired pitching temperature is crucial to locking in the flavors and aromas you desire in your beer. To achieve this, you'll need the right equipment.

    One effective method is using a counterflow chiller (CFC) like the counterflow chiller from Bräu Supply, which simultaneously chills and transfers the wort from the boil kettle to your fermenter. Aim to bring the wort temperature below 80°F, but don't worry if it's a bit higher; you can fine-tune the chilling later using a glycol chiller.

    Using a glycol-chilled conical fermenter can make a significant difference in this stage. It allows you to rapidly bring the wort down to your exact pitching temperature, typically around 66-68°F. This not only saves water but also prevents overshooting your target temperature. While the wort chills, take the opportunity to clean your equipment and organize your brewery. Once the wort reaches the desired pitching temperature, aerate it with pure oxygen and pitch an ample amount of yeast, especially for higher gravity batches.

    2. Fermentation

    Allow your beer to ferment for 5-10 days before considering any dry hop or secondary additions. Most ales complete their primary fermentation in 3-5 days, depending on the yeast strain. During the first 24 hours of active fermentation, maintaining proper temperature control is critical. As fermentation slows, you can let the temperature free-rise to 70-72°F. This ensures full fermentation and eliminates unwanted off-flavors.

    Whether you use a conical fermenter with a dump valve or a traditional fermenter, it's essential to avoid oxygen exposure. Use a blowoff tube submerged in sanitizer or airlocks to keep your beer safe. Secondary fermentation vessels are not necessary for most styles.

    3. Yeast Removal

    If you plan to harvest yeast, it's advisable to remove it before dry hopping to preserve yeast health and prevent negative interactions with hops. Even if you don't harvest yeast, reducing yeast presence before dry hopping is beneficial.

    To achieve this, consider soft crashing your fermenter to 55-60°F to allow yeast to settle in the cone. Keep in mind that you should only start the soft crash around days 7-8 when fermentation is near completion. For bucket fermenters, yeast removal and dumping may not be possible, but this is generally not a concern for most beer styles.

    4. Dry Hopping

    After primary fermentation, prepare for dry hopping. Dry hopping under pressure is a recommended method to prevent oxidation and maximize hop flavor and aroma extraction.

    Seal the vessel under 10 PSI after adding your dry hop charge, but ensure you have the necessary equipment, including a pressure gauge, pressure relief valve (PRV), and spunding valve to manage pressure safely. If you use a dry hopper, purge it of oxygen thoroughly from the bottom up. Add pressure to the fermenter, crack the top butterfly valve, and let pressure flow through the vessel and hopper while purging from the top. After adding your dry hops, pressurize the vessel and seal it off.

    For double dry hopping, remove as much trub and hops as possible through the dump valve before adding additional dry hop charges. Typically, the first dry hop charge is added on days 5-6, with the second on days 8-9. Utilizing a dry hopper allows for pressure maintenance during dry hopping and prevents beer explosions by equalizing pressure between the hopper and the fermenting vessel.

    5. Cold Crashing

    Once secondary fermentation is complete, initiate the cold crash. Lower the temperature to 35°F for 48 hours. Cold crashing can create a vacuum, leading to suck-back, where airlock sanitizer and oxygen are drawn into the beer. To avoid this, seal the vessel under 7-10 PSI to prevent a damaging vacuum. Our Unitank pressure-capable fermenter simplifies this process, but for bucket fermenters, I haven't found a great solution to remedy the inflow of oxygen into the fermenting bucket. 

    While it's challenging to eliminate oxygen entirely at this stage without specialized equipment, steps like using S-type airlocks can help minimize the risk of sanitizer suck-back. Remember that certain beer styles are more sensitive to oxygen than others.

    6. Conditioning, Carbing, and Packaging

    Most beers are kegged around day 10-12 of the brewing process. For a closed and oxygen-free transfer, use the star-san purging method, which is more effective than simple CO2 purging. Transfer your beer with 3-5 PSI of head pressure to prevent foaming.

    Once the beer is transferred, seal the keg with 25 PSI to ensure a tight lid seal and provide initial CO2 for carbonation. Then, dial back the regulator to serving pressure for extended carbonation and conditioning. Leave the beer connected to CO2 in your fridge or keezer. Your beer should be fully carbonated in about 7 days.

    Consider adopting the low and slow force carbonation method, which doubles as cold conditioning time. Hoppy beers benefit from this approach, as it allows their flavors to mellow and develop. Rushing this process can compromise the final product.


    The cold side of brewing is a crucial part of producing high-quality beer, especially when brewing hoppy styles like NEIPAs and IPAs. The process outlined here, born from the world of NEIPAs, can be applied to any beer style, resulting in improved overall beer quality. By mirroring commercial processes and paying careful attention to every step, you can achieve exceptional results in your homebrewing journey. If you have any questions or suggestions for additional details in any step of the process, we welcome your feedback to further enhance your brewing experience.

    Expanding the Conclusion: The Importance of the Cold Side Process

    The cold side process is often underestimated by homebrewers, but it plays a pivotal role in shaping the final taste, aroma, and quality of your beer. As we've explored in this comprehensive guide, each step in the cold side process contributes to the success of your brew, particularly when crafting hoppy beer styles such as New England IPAs (NEIPAs) and IPAs.

    Understanding the nuances of the cold side process not only improves the flavor and aroma of your beer but also elevates the overall brewing experience. Whether you're a seasoned homebrewer or just starting out, embracing these techniques can lead to consistently exceptional results.

    The meticulous approach to chilling wort, managing fermentation, removing yeast, and dry hopping under pressure ensures that the hop character in your beer shines through without undesirable off-flavors. It's a labor of love, but the reward is a beer that stands out among the rest.

    As you progress in your brewing journey, you may find yourself experimenting with different hops, yeast strains, and adjuncts. This flexibility is one of the joys of homebrewing, and the cold side process provides a solid foundation for any beer style you wish to explore.

    In conclusion, mastering the cold side of brewing is the key to crafting beers that impress both yourself and others. While the techniques outlined in this guide are focused on hoppy styles, they can be adapted and applied to any beer you brew. So, roll up your sleeves, fine-tune your equipment, and embrace the cold side. Your taste buds will thank you. Cheers to exceptional homebrewing!


    Ready to enhance your brewing experience with top-of-the-line equipment? Look no further than Bräu Supply, the pioneers of the all-in-one brew system, the Unibräu. Our commitment to quality is unmatched, with every product crafted from premium 304 stainless steel and designed with modularity and electric brewing in mind.

    Explore our range of products, including the Unibräu, Unibräu Pro, and HERMS systems, all offering unparalleled efficiency and value. With Unitank fermenters and a vast selection of accessories, we ensure you have everything you need for a perfect brew. Don't settle for less—check out our products and discover the Bräu Supply difference!

    More Articles on Fermentation: