Mash Tun
10G → 50GRecirculation-ready mash vessel with laser-cut false bottom and reinforced base plate. Hinged grain access door standard on 15G, 20G, 30G, and 50G builds for fast, safe grain-out without lifting a hot grain basket.
DrainPro brew kettles are heavy-duty 304 stainless with a true welded 1.5" tri-clamp bottom drain, not a side port or a threaded fitting. Built for electric brewing, fully tri-clamp, in 10, 15, 20, 30 and 50 gal. Three dedicated vessels: mash tun, boil kettle and hot liquor tank. Buy one, two or all three; they share fittings and stack into a complete HERMS or RIMS hot side.
Most "premium" brew kettles use a side port and ask you to tilt the kettle to finish a transfer. The DrainPro doesn't — the 1.5" tri-clamp drain is welded into the bottom plate, the floor slopes to it, and the kettle empties completely with the vessel sitting level on its stand. No tilting, no trapped trub, no dead zones, no threaded leak points.
Not a side port. Not a threaded fitting. A fully welded TC ferrule pressed into the bottom plate of the kettle, so the floor slopes to a single sanitary drain that you clamp a butterfly valve to. Complete emptying with no tilting; CIP cycles run start-to-finish through the same port.
Every port — element, racking, whirlpool, recirculation, probe, lid, drain — is welded 1.5" tri-clamp. No NPT threads, no Teflon tape, no bacteria traps. Standard sanitary tri-clamp consumables; valve service with a 9/16" wrench.
1.5" TC recirculation port standard on every vessel; element port on the HLT and boil kettle. ULWD elements drop in; pumps clamp on. No drilled holes, no aftermarket adapters — the kettle ships ready for closed-loop electric process control.
Welded tri-clamp port in the lid for a spray ball or steam condenser. Clean caustic + acid + rinse without removing the lid; condense boil steam if you're brewing indoors. The kettle is designed to be cleaned, not just brewed in.
Each DrainPro is a standalone vessel — use it as a replacement kettle for an existing brewhouse, a dedicated mash tun for a HERMS rebuild, or the heart of a new pilot system. They share fittings and stack into a complete electric brewery when you're ready.
Choose a kettle about 1.5 to 2 times your batch size, so the boil has room for foam. Most brewers buy the mash tun and HLT in the same size as the boil kettle.
The standard homebrew size. Holds the full pre-boil volume, about 6.5 gal, with room for foam.
Shop boil kettles →15 gal works on electric, where you can turn the element down when foam climbs. On a burner, or for big beers, go 20 gal.
Shop boil kettles →Fits a 20 gal batch with room for the boil, or a strong 15 gal batch with plenty to spare.
Shop boil kettles →The pilot and nano size, with a grain door on the mash tun and the same tri-clamp layout as the smaller vessels.
Kettle size chart →Buy them à la carte to replace tired side-drain kettles, or stack all three for a complete HERMS / RIMS hot side. The bottom drain, tri-clamp port layout, and 304 stainless build are constant across the line; what changes is which port goes where and whether you've got a false bottom for grain.
Recirculation-ready mash vessel with laser-cut false bottom and reinforced base plate. Hinged grain access door standard on 15G, 20G, 30G, and 50G builds for fast, safe grain-out without lifting a hot grain basket.
Heavy-walled boil vessel sized for electric ULWD elements. 1.5" TC element port, recirculation port for whirlpool, and the bottom drain that pulls a clean wort transfer straight off the hops without a side-port pickup tube.
Strike and sparge water vessel. Heats strike water on a TC element, feeds the mash tun through the recirculation port, holds sparge water at temperature for the back half of brew day. Same bottom drain pulls a final clean rinse.
Welded 1.5" TC ferrule in the bottom plate, sloped floor, butterfly valve clamps right on. Empty the kettle without lifting it, without a pickup tube, without a side-port elbow that traps half a gallon of wort.
Lid TC port for a spray ball; bottom drain returns to a CIP pump. Caustic + acid + rinse in a 90-minute cycle. No tilting to drain rinse water, no rags to wipe down dead zones.
Every port is welded sanitary tri-clamp. No threads, no Teflon tape, no NPT-to-TC adapters cluttering a parts bin. Standard sanitary consumables; nothing about owning a DrainPro means waiting on a single-supplier part.
Thick-walled 304 stainless, fully TIG-welded, reinforced bottom plate. Stable on the stand under a 30-gallon mash; doesn't oil-can when a 5,500W element pulls full duty.
15G, 20G, 30G, and 50G mash tuns ship with a hinged grain access door. Spent grain shovels out the side instead of you wrestling a 60-pound grain basket out of a hot vessel.
Each vessel is standalone. Drop one into an existing brewhouse to replace a tired side-drain kettle, or pick up all three over time and stack them into a complete HERMS hot side — they share fittings and dimensions across the line.
Most "premium" homebrew kettles use a side-mounted ball valve with an internal pickup tube. The DrainPro replaces that whole apparatus with a single welded drain in the bottom of the vessel. Here's what changes.
| Feature | DrainPro · bottom drain 1.5" welded TC in the bottom plate★ What you want | Side-drain kettle Ball valve + pickup tubeIndustry default |
|---|---|---|
| Full emptying | ✓ Complete drain, no tilt |
✕ Tilt required to clear pickup tube |
| Wort recovery | Highest · no dead volume |
Medium · dead volume below pickup |
| CIP cycles | ✓ Lid TC → bottom drain |
Partial · manual rinse + tilt |
| Sanitation | Excellent · no threaded leak paths |
Good · threaded ball-valve seam |
| Whirlpool performance | Cleaner · trub cone over the drain |
Pickup tube catches break material |
| Step mashing & recirc | Optimized · dedicated recirc TC port |
Works, but recirc shares the drain |
| Conical fermenter integration | ✓ Bottom-to-top tri-clamp transfer |
Side-port transfer with elbow |
| Cleaning effort | Lowest · spray + drain |
High · disassemble pickup tube every batch |
In stock. Click through to the vessel page for the size you want.
| Vessel | 10G | 15G | 20G | 30G | 50G | |
|---|---|---|---|---|---|---|
| Mash Tunlaser-cut false bottom · grain door 15G+ | $774 | $1,168 | $1,279 | $1,607 | $2,264 | Shop → |
| Boil Kettleelement + recirc + whirlpool | $622 | $731 | $841 | $1,133 | $1,659 | Shop → |
| Hot Liquor Tankstrike + sparge water | $658 | $768 | $877 | $1,170 | $1,718 | Shop → |
Vessel-only prices · shown in CAD
15G now in stock across the line. Sits between the 10G and 20G with the full grain-door treatment — headroom over 5-gallon batches without jumping to a 20G.
Buying all three vessels? A complete 3-vessel HERMS hot side (Mash Tun + Boil Kettle + HLT) in the same size is the standard build. Email us for a 3-vessel bundle quote — we'll pull duties, freight, and a small bundle discount into one invoice.
Real reviews from real brewers — pulled live from Judge.me.
About 1.5 to 2 times your batch size: a 10 gal kettle for 5 gal batches, 15–20 gal for 10 gal batches, 30 gal for 15–20 gal batches and 50 gal for 1 BBL. The extra room holds the full pre-boil volume and the foam before the hot break. On electric the smaller size works, because you can turn the element down when foam climbs. See the brew kettle size chart.
A side valve with a dip tube leaves wort below the pickup, and you tip the kettle to get the last of the rinse water out. A bottom drain on a sloped floor empties the kettle completely, collects trub in one spot at the drain, and lets you rinse straight out. You just need room under the kettle for the valve.
The Spike Tank is the closest match. Both are bottom-drain kettles from 10 to 50 gallons, but every DrainPro vessel comes with a CIP-ready lid, and every DrainPro mash tun includes a false bottom. Spike charges extra for both. Compared the same way, a set of all three DrainPro vessels costs about 20% less in US dollars, and about 40% less in Canada. See the side-by-side comparison with US and Canadian prices.
No. The 1.5" tri-clamp ferrule is fully welded into the bottom plate of the kettle — there are no threaded leak points. You clamp a sanitary butterfly valve to the ferrule with a TC clamp + gasket; that's the only seal in the drain path, and replacement gaskets are off-the-shelf if you ever need them.
Yes — Boil Kettles and HLTs both ship with a 1.5" TC element port on the side of the vessel, sized for any standard ULWD tri-clamp element. Drop the element in, clamp it down, plug the controller in. No drilling, no threaded adapters, no aftermarket parts.
Most brewers start with a Mash Tun + Boil Kettle pair — that's the minimum for a recirculating BIAB or eBIAB setup. Add the HLT when you're ready to run a full 3-vessel HERMS / RIMS with a dedicated strike-water vessel. All three share the same fittings; you can stage the purchase over months without ending up with mismatched hardware.
Many Spike and Ss BrewTech kettles use a side-drain ball valve with an internal pickup tube. The DrainPro drains from the bottom instead. Every DrainPro also ships with a welded tri-clamp port in the lid for a spray ball or steam condenser, and has 1.2 mm 304 stainless walls, the thickest in the industry. For Spike's bottom-drain kettle, see the DrainPro vs Spike Tank comparison.
Absolutely. The lid ships with a welded tri-clamp port for a spray ball; the bottom drain returns through the same TC plumbing as your transfer. A standard caustic + acid + rinse cycle runs in 60–90 minutes without ever opening the vessel. You'd need to add a CIP pump and a spray-ball assembly — we sell both as accessories.
If your pump and controller use tri-clamp fittings or standard 1.5" TC adapters, yes. If your existing brewhouse runs on threaded NPT, you'll want a small kit of TC-to-NPT adapters — we can include them at checkout, or ship them on their own. Email us your gear list and we'll send back exactly what you need.
The 15G, 20G, 30G, and 50G Mash Tuns ship with a hinged grain access door welded into the side of the vessel. The 10G Mash Tun ships without a grain door — spent grain is removed via the false bottom at that scale.
2 years on the stainless: the vessel, every weld and TC port, grain baskets, brew tables and stainless fittings.
1 year on electronics: controllers, pumps, heating elements, solenoid valves and temperature probes, whether they come with a system or are bought on their own. Not covered on elements: dry-firing (running the element without liquid covering it), and heat or melt damage at the twist-lock plug from a loose or improper connection — a proper, fully seated connection has to be maintained.
Gaskets, clamps and O-rings are consumables; replacements are in stock and cheap. Warranty replacement parts are free, and we bill the shipping at cost. If we need the faulty part back, we send you a prepaid label.
Lifetime parts support on everything we build — serviced, not replaced. Orders placed before October 8, 2026 keep the warranty terms they were sold with.
No tilting. No pickup tube. No left-behind wort. The same welded drain pulls a clean transfer and a clean CIP rinse.